Wednesday, June 4, 2014

How to create this field for football with Sketchup

Simone Piccioni

First I created a regulatory field , ie, a rectangle of 117 x 64 mm , and I drew the lines of the game inspired by some photos found on the net.

Post Production Technique for Architectural Renderings by Mark Lester Ocampo  

At this point, with 15 mm thick boards , I created a box around the field , each of these is a component so if we're going to work on an automatic will change all copies and this will be very useful in the later stages.

How to create this field for football with Sketchup   

This field needs to be a little ' raised , perhaps with legs 80x80 mm square base (they are always copies of a component ) , in the lower part of the legs I created with squares slightly smaller.

How to create this field for football with Sketchup   

To hold the whole structure, but also to give more realism , I added the bolts. But back to the speech of the components, if we add the bolts entering the component " Paw " ( just click twice above) magically appear on the other leg ... unless you do not want to repeat several times the same operation.

How to create this field for football with Sketchup   

However, the realization of the bolts is very simple but effective . I created two cylinders of different sizes (see photo below). In the smaller one I created with the tool "Offset" a circle even smaller.

How to create this field for football with Sketchup   

and I reduced to 5 the number of segments in the information entity and then push it slightly inward.

How to create this field for football with Sketchup   

To give more realism to the bolt I rounded the edge of the smaller cylinder with the plugin "Round Corner".

How to create this field for football with Sketchup   

Finally, this is the result.

How to create this field for football with Sketchup   

We return to the playing field ... All football fields of the banks have in order not to stop the ball , even mine, and it is a triangle 20 x 20 mm which runs along its perimeter , obviously not at the door.

How to create this field for football with Sketchup   

But now comes the fun part ! Make 8 equally spaced holes 20x20mm larger than one in the middle . Easier said than done.

How to create this field for football with Sketchup   

I added the rings around the holes where they will spend the iron bars of the players and a boss where you stop bars of 'opponent . Even these have rounded them with the plugin "Round Corner" and I have also added the screws.

How to create this field for football with Sketchup   

For the central hole instead I made a ring in her size then I created a quarter-sphere and I pulled one of the two sections,

How to create this field for football with Sketchup   

and I combined everything.

How to create this field for football with Sketchup   

Then I mounted the door , always with screws. Make it however you like , I took a cue from the internet.

How to create this field for football with Sketchup   

To count the points I made a cube and rounded edges always with the plugin "Round Corner" and copied 12 times.

How to create this field for football with Sketchup   

This is where things get complicated. To achieve the tiller handle I drew half of his section,

How to create this field for football with Sketchup   

then with the instrument , "Follow me ," I have followed the trajectory of a circle of 30 segments that I drew earlier.

How to create this field for football with Sketchup   

But with a handle so ' smooth swivels are wasted.

How to create this field for football with Sketchup   

So to give it a more boxy shape I created a hole decagonal ( that ugly word ... ) on a rectangle,

How to create this field for football with Sketchup   

of sufficient scale to bring out its corners slightly from the cylindrical part of the ' grip making sure it is perfectly centered.

How to create this field for football with Sketchup   

From the rectangle tool " Push / Pull " I have created a solid to almost completely cover the ' grip , I exploded and then highlighted everything, then open the drop-down menu I clicked on " Intersect with Model".

How to create this field for football with Sketchup   

After deleting segments of the white solid I can only delete segments that are intersected with the decagon ( parts violet photo below).

How to create this field for football with Sketchup   

And also the handle is ready.

How to create this field for football with Sketchup   

Now the tricky part. Players!

How to create this field for football with Sketchup  

I started with an image I found on the net and began modeling on this half player. We need a little 'practice.

How to create this field for football with Sketchup 

As you can see in the ' image below , I created a border that would ply Sock player.

How to create this field for football with Sketchup 

To make it I used another plugin called "Joint push pull," virtually acts as the instrument "Push/Pull"

How to create this field for football with Sketchup  

but with the ability push / pull faces at the same time more complex solids (see photo below).

How to create this field for football with Sketchup   

I used the same plugin for the collar of his shirt. So a few tweaks to the head and body,

How to create this field for football with Sketchup   

and I joined a mirrored copy

How to create this field for football with Sketchup   

To round better player , I used the plugin " Subdivide and smooth " setting the iteration to 1.

Now, just assemble and paint all the pieces. I also added the springs at the end of the race of the bars, you can see how to implement them by clicking here.

The field is ready!

How to create this field for football with Sketchup  

~~~~~~~~~~~~~~~~~~~~~
Published By
Arka Roy
www.sketchup-ur-space.com
~~~~~~~~~~~~~~~~~~~~~ 
 

 

No comments:

Post a Comment